home *** CD-ROM | disk | FTP | other *** search
- Path: crux4.cit.cornell.edu!fkrj
- From: fkrj@crux4.cit.cornell.edu (Benjamin Kenobi)
- Newsgroups: comp.sys.amiga.hardware
- Subject: CV64 Interlaced Problems
- Date: 3 Feb 1996 00:04:48 GMT
- Organization: Cornell University
- Sender: do12@cornell.edu (Verified)
- Message-ID: <4eu8r0$oag@newsstand.cit.cornell.edu>
- NNTP-Posting-Host: crux4.cit.cornell.edu
- X-Newsreader: TIN [version 1.2 PL2]
-
-
- One question (I think I remember this being discussed lately). I have
- a CV64 and 1942 monitor :-( I can get resolutions above 800*600 with
- interlace amazingly enough, but when I go above 8-bit on these modes, the
- display is trashed. That is, an 8-bit 1024*768 works fine interlaced,
- but go to a 16 or 24-bit mode and the screen gets messed up. Is this
- a hardware or software problem, and does it also apply to the non-interlaced
- versions of these modes?
-
- Sorry if this is a FAQ,
- Dan
-
- --
- -----------------------------------------------------------------------------
- ___
- //// "Hey Joe, bring me that crowbar, will ya? I can't seem to
- ___ //// get my disk out of this MAC!"
- \\\\ ////
- \\\////
- \\\\/ AMIGA 4000/040 Intel outside, /\/\otorola within.
- -----------------------------------------------------------------------------
-